The Deltic Group Inc.

Home Aviation Defense
 and Security
Marine Contact


Portasonc® FL0 Clamp-on Ultrasonic Liquid in Pipe Flow Meter

Portasonci FL0 Portasonic FL0
More Information

The Portasonic® 2.FL0 flow meter, for measuring the volumetric flow rate of clean liquids in pipes.

The Portasonic® 2.FL0 is a handheld ultrasonic flow meter for testing on an wide variety of different pipe dimensions, liquid types, measurement methods, flow speeds and environments. The unit has a straightforward testing process with a step by step guide on how to set your flow meter up before measuring. The user simply needs pipe diameter, wall thickness and liquid type information, to be able to easily and accurately measure flow rate.

Portasonic® 2.FL0  flow meter from Coltraco

Type – 2nd Generation Portable Ultrasonic Flow Meter 
Part Number – PS012

Sensors available for a range of pipe diameters. For fluid temperature exceeding 90°C, high temperature sensor available up to 160°C. For installation in tight spaces, please note the sensor dimensions below. Loose sensors can be supplied if options below are too large:

Portasonic®2.FL0 sensor options


No mount*
    Pipe diameter range: 15mm – 100mm
    Sensor dimensions: 45mm x 25mm x32mm
With mount
    Pipe diameter range: 15mm – 100mm
    Sensor dimensions: 318mm x 59mm x 85mm
Operating temperature: -30C to 90C


No mount*
    Pipe diameter range: 50mm – 700mm
    Sensor dimensions: 64mm x 39mm x44mm
With mount
    Pipe diameter range: 50mm – 300mm
    Sensor dimensions: 568mm x 59mm x85mm
Operating temperature: -30C to 90C


No mount*
    Pipe diameter range: 300mm – 6000mm
    Sensor dimensions: 97mm x54mm x53mm
Operating temperature: -30C to 90C

*For sensors without mount, jubilee clips are provided to secure the sensors to the pipes.


Linearity                               0.5%
Repeatability                       0.2%
Accuracy                              ±1% of reading at rates >0.2m/s
Response Time                   0-999 seconds user-configurable
Maximum Velocity               ±32 m/s
Pipe Size                             15mm-6000mm (different sensors available for different pipe sizes)
Totalizer                                Net, Positive and Negative Flow
Liquid Types                         Will work on most types of non-aerated liquids with low solid particle content such as water, sea water and most oils.
Display                                   LCD display with 4 x 16 Letters
Communication Interface     RS232
Transducer Cable Length    Standard 5m x 2, optional 10m x 2
Power Supply                        3 AAA built-in, non-removable NiH 2000 mAh batteries. Lasts up to 12 hours of operation when fully charged.
Data Logger                          Built-in data logger can store over 2000 lines of data
Housing Materials                Black Anodised Aluminium (Casing), ABS Plastic (Sensors), Aluminium (Guide Rails)
Main Unit Dimension            225mm (Height) x 110mm (Width) x 35mm (Depth)
Main Unit Weight                  650g with batteries